manualshive.com logo in svg

Olivetti PG L2435, Operation Manual, Page: 118 / 222

Share
Download
Olivetti PG L2435 Operation Manual Download Page 118

Using the Operation Panel

7-11

Report Print

The printer prints the report. Report Print includes the following items:

• Print Menu Map

• Print Status Page

• Print Fonts List

• Print RAM Disk File List

1

Press 

[MENU]

.

2

Press 

 or 

 repeatedly until 

Report Print >

 appears.

Note that menus shown in the list may vary depending on which optional 
units installed in the printer.

Print Menu Map

The printer prints a full list of the menu selection system menu map.

1

Press 

 while 

Report Print >

 is displayed.

2

>Print Menu Map

 appears. In other displays, press 

 or 

repeatedly until the map appears.

3

Press 

[OK]

. A question mark (

?

) appears.

4

Press 

[OK]

. The message 

Processing

 appears and the printer

prints a Menu Map.

Report Print

>

>Print Menu Map ?

Summary of Contents for PG L2435































































































































































































































Reviews:

No comments