manualshive.com logo in svg

Olivetti PG L2435, Operation Manual, Page: 113 / 222

Share
Download
Olivetti PG L2435 Operation Manual Download Page 113

7-6

Using the Operation Panel

Keys

The operation panel keys are used to configure the printer operation. 
Note that certain keys have a secondary function.

GO Key

Use this key to:

•

Recover from certain errors.

•

Recover from Auto Sleep mode.

Cancel Key

This key is used to:

•

Cancel a printing job.

•

Stop the alarm sound.

•

Reset numeric values or cancel a setting procedure while using 
menu system.

Canceling a Printing Job

1

While the printer displays 

Processing

, press 

[Cancel]

.

Print Cancel?

 appears on the message display followed by the 

job name currently in progress.

2

Press 

 or 

 to display the desired job and 

[OK]

.

Canceling data

 appears on the message display and printing 

stops after the current page is printed.

MENU Key

[MENU]

 lets you enter the menu system to change the setup and 

printing environment of the printer.

Pressing this key during a menu selection will terminate the selection 
and return the printer to the normal operation.

Summary of Contents for PG L2435































































































































































































































Reviews:

No comments