Y103920-3
Service Manual
145
3.3.2
TQSB-2 PCB
(1)
Remove the pulse motor (see 3.3.1).
(2)
Remove the connectors Q, R from the GRT PCB
P
.
(3)
Remove the screw S and remove the GRT PCB
P
.
Note :
Refer to Detall A in the previous page.
3.3.3
Hopping Roller Shaft Assy and One-way Clutch Gear
(1)
Follow up to step (3) of 3.3.1 and remove the hopping frame assy.
(2)
Remove the screw 1 and remove the earth plate 2. Remove the sensor lever (T) 7 and remove
the transion spring D and remove the ground plate 6. Remove the gear 3 and remove the metal
bush 5 and hopping roller shaft assy
4
.
(3)
Remove the E-ring A and remove the one-way clutch gear
B
on the right side of the feed roller
0 .
Note :
The metal bush C also comes off. Be careful not to lose it.
4
1
2
3
5
A
B
C
0
9
8
6
D
7
Shaft
The tension lever and the sensor lever need concurrent replacing.
Summary of Contents for PG L22 Special
