Field Service
V
er. 1.0 Jul. 2009
2. PERIODICAL MAINTENANCE PROCEDURE
9
PC-408
MAINTENANCE
2.1.3
Replacing the pick-up roller
A. Periodically replaced parts/cycle
• Pick-up roller: Every 300,000 feed
NOTE
• Replace the separation roller assy, feed roller and pick-up roller at the same time.
B. Procedure
1.
Remove the right door.
See P.14
2.
Remove the rear right cover.
See P.14
3.
Remove two screws [1] and separa-
tion roller mounting bracket assy [2].
4.
Insert a driver into the hole [1] at the
rear of the feed tray and pull out the
paper feed tray.
5.
Remove three tabs [1], and remove
the harness cover [2].
6.
Remove the harness from two wire
saddles [3].
7.
Disconnect the connector [4].
A093F2C500DA
[2]
[1]
[1]
A093F2C509DA
[1]
A0X
W
F2C01
8
DA
[1]
[2]
[3]
[
4
]
Y111260-5 Service Manual