Olivetti OLIBOOKM1020 User Manual Download

Page: 86 / 102

Interface (Ports & Jacks)

A - 2 Interface (Ports & Jacks)

Notebook Ports and Jacks

Item

Description

Card Reader Port

The card reader allows you to use some of the latest digital storage cards. Push the card into the slot
and it will appear as a removable device.

DC-In Jack

Plug the supplied AC/DC adapter into this jack to power your computer.

External Monitor Port

This port allows you to connect an external monitor, or Flat Panel Display, to get dual video or
simultaneous display on the LCD and external monitor/FPD.

Headphone-Out Jack

Headphones or speakers may be connected through this jack.

Note

: Set your system’s volume to a

reduced level before connecting to this jack.

Microphone-In Jack

Plug an external microphone in to this jack to record on your computer (see

“Audio Recording

from Microphone” on page 2 - 6

for configuration information).

RJ-45 LAN Jack

This port supports LAN (Network) functions.

Note

: Broadband (e.g. ADSL) modems usually connect to the LAN port.

Security Lock Slot

To prevent possible theft, a Kensington-type lock can be attached to this slot. Locks can be purchased
at any computer store.

Summary of Contents for OLIBOOKM1020







































































































Search results

Summary of Contents for OLIBOOKM1020

Reviews:

Related manuals for OLIBOOKM1020

Brands by name

Popular brands

Olivetti OLIBOOKM1020, User Manual

Search results

Summary of Contents for OLIBOOKM1020

Reviews:

Related manuals for OLIBOOKM1020

Brands by name

Popular brands