Ver.1.0 Mar. 2004
Setting for Printer Management Utility Remote Care
Y103290-2
Service Manual
3-3
II
I Adj
u
st
m
e
nt
/Se
tt
in
g
2.3
Supplementary information: Log check
• “TX/RX Test” is the function that sends an e-mail to the mail address of the controller
(“Email Address” set in “Receive”). The e-mail sent to the controller is received by the
controller during mail check. The log shows the record of transmission and reception of
this e-mail and, if the transmission/reception is normally terminated, the test can be
regarded as being okay.
• The log is a record of ten different transmissions and/or receptions, no. 1 being the latest.
2.3.1
Example of successful test transmission/reception:
2.4
Connection with Printer Management Utility Remote Care
Device Management Server
• When the above settings have been made, call the Center software administrator and
ask him or her to make the initial connection to the set mail address.
Log showing successful reception
Log showing successful test transmission
Same time
and date