Olivetti FK-502 Service Manual Download Page 77

Page: 77 / 194

4. REPLACEMENT PROCEDURE

Field Service Ver. 7.0 Jan. 2009

FK-502/Network Fax

MAINTENANCE

4.5

In the case of

d-Color

35/

30/

Plus

4.5.1

Removal of the FK-502 (

d-Color

35/

30/

Plus

25)

• In order to replace the FK-502, remove the FK-502 in the following order.

NOTE
• Be sure to check to see if the main power switch is turned off.
• The board may be damaged due to static electricity. Be sure to take an appropriate

measure against static electricity before conducting the operations.

Turn off the main power switch and
the power switch of the main body,
and then unplug the power cord from
the power outlet.

Remove the Telephone line cable
that is connected.

Remove the lower rear cover. (7
screws)

Pull out the dust proof filter provided
on the rear side of the main body.

Remove the upper rear cover. (4
screws)

Service Manual Y104784-2

Summary of Contents for FK-502


































































































































































































Search results

Summary of Contents for FK-502

Reviews:

Olivetti FK-502, Service Manual, Page: 77 / 194

Search results

Summary of Contents for FK-502

Reviews: