Olivetti FK-502 Service Manual Download Page 70

Page: 70 / 194

Field Service Ver. 7.0 Jan. 2009

4. REPLACEMENT PROCEDURE

FK-502/Network Fax

MAINTENANCE

4.3.2

Removal of the FK-502 (Extension line) (

d-Color

1Plus

)

• In order to replace the FK-502, remove the FK-502 (Extension line) in the following order.

NOTE
• Be sure to check to see if the main power switch is turned off.
• The board may be damaged due to static electricity. Be sure to take an appropriate

measure against static electricity before conducting the operations.

Turn off the main power switch and the power switch of the main body, and then unplug
the power cord from the power outlet.

Remove the Modular cable that is connected.

Remove the shield box cover.
(4 screws)

Remove the Fax Multi Line kit.
(1 tabs, 6 screws, PCI board connec-
tor)

Y104784-2 Service Manual

Summary of Contents for FK-502


































































































































































































Search results

Summary of Contents for FK-502

Reviews:

Olivetti FK-502, Service Manual, Page: 70 / 194

Search results

Summary of Contents for FK-502

Reviews: