Olivetti FK-502 Service Manual Download Page 64

Page: 64 / 194

Field Service Ver.

.0 Jul. 2009

4. REPLACEMENT PROCEDURE

FK-502/Network Fax

MAINTENANCE

REPLACEMENT PROCEDURE

4.1

In the case of

d-Color

MF360

280/

220

4.1.1

Removal of the FK-502 (

d-Color

360/

280/

220)

• In order to replace the FK-502, remove the FK-502 or FK-502 (Extension line) in the fol-

lowing order.

NOTE
• Be sure to check to see if the main power switch is turned off.
• The board may be damaged due to static electricity. Be sure to take an appropriate

measure against static electricity before conducting the operations.

Turn off the main power switch and the power switch of the main body, and then unplug
the power cord from the power outlet.

Open the door portion of the right
side rear cover of the main body.

Remove the telephone line cable
that is connected.

Remove the rear right side rear
cover of the main body. (4 screws)

Y104784-2 Service Manual

Summary of Contents for FK-502


































































































































































































Search results

Summary of Contents for FK-502

Reviews:

Olivetti FK-502, Service Manual, Page: 64 / 194

Search results

Summary of Contents for FK-502

Reviews: