Olivetti FK-502, Service Manual, Page: 138 / 194

Field Service Ver. 7.0 Jan. 2009 9. TROUBLESHOOTING
1 31
FK-502/Network Fax
TROUBLESHOOTING
TROUBLESHOOTING
9. TROUBLESHOOTING
9.1 ERROR CODES
Code No. Category Contents of error How to correct
B0-01 FAX board error
FAX board error 1 (FAX
ROM check sum error)
Pull out and insert the Fax board to
check its installation.
If the trouble is not yet corrected, hard-
ware of the fax board may be defective.
Replace the fax board in such a case.
B0-02 FAX board error
FAX board error 2
(DPRAM check error)
B0-03 FAX board error
FAX board error 3
(FAX Initialization NG)
B0-51
FAX board installation
error (Line 1).
Pull out and insert the fax board to
check its installation.
If the trouble is not yet corrected, check
if the fax (main) is set to [Unset] on the
[System 2]-[Option board Status] screen
in the service mode.
If it is set to [Unset], set to [Set].
B0-52
FAX board installation
error (Line 2).
Pull out and insert the FAX board to
check its installation.
If the trouble is not yet corrected, check
if the fax (Sub) is set to [Unset] on the
[System 2]-[Option board Status] screen
in the service mode.
If it is set to [Unset], set to [Set].
B1-10 FAX driver error
Instance generation error
or observer registration
error
Turn OFF/ON the main power switch.
B1-11 FAX driver error
Configuration space
initialization NG
B1-12 FAX driver error
Semaphore acquisition,
release error
B1-13 FAX driver error
Sequence error among
main body tasks
B1-14 FAX driver error
Message queue control
error
B1-15 FAX driver error
Main body - sequence
error among FAX boards
Pull out and insert the FAX board to
check its installation.
B1-16 FAX driver error
FAX board nonresponse
(Nonresponse after initial-
ization)
B1-17 FAX driver error ACK waiting timeout error
B1-18 FAX driver error
Receiving undefined
frame
B1-19 FAX driver error DMA transfer error
B1-20 JC Soft error (Fax board side) Turn OFF/ON the main power switch.
Y104784-2 Service Manual