Olivetti DP-700, Service Manual

Page: 50 / 76

3JX
2-1-1
2-1 Mechanical construction
2-1-1 Mechanical construction
The original placed on the original tray is fed sheet by sheet through the original feeding section and conveyed on the slit
glass. Shortly after one side is scanned by the CCD over the slit glass, the original is scanned by the CIS. The original
attached to the CIS is ejected to the original eject table after the second side is scanned by the CIS.
Figure 2-1-1 Document processor
(1) Original tray
(2) Lift lever
(3) DP forwarding pulley
(4) Original feed color
(5) DP original feed belt
(6) Original feed color
(7) DP separation pulley
(8) Registration pulley
(9) Registration roller
(10) Original conveying pulley
(11) Original conveying pulley
(12) Reading guide
(13) Original conveying roller
(14) Original conveying pulley
(15) CIS
(16) Eject roller
(17) Original conveying pulley
(18) Eject roller
(19) Eject pulley
(20) Original eject table
Y106871-5 Service Manual
(21) CIS roller