Olivetti d-COPIA5001MF, Operation Manual, Page: 498 / 708

9-30
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
1
Display the screen.
1
[
System Menu/Counter
] key > [
User Login/Job Accounting
]
2 "User Login Setting" [
Next
] > "ID Card Settings" [
Next
]
2
Configure the settings.
The following settings can be selected.
NOTE
This functions appears when the Card Authentication kit is activated.
Applications (page 11-8)
This function does not appear when the user logs in as a network authentication user.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login
]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Item Descriptions
Keyboard Login
When ID card authentication is enabled, select whether or not
login by keyboard is allowed.
Value : Permit, Prohibit
Additional
Authentication
*1
*1 This function does not appear when the server type is set to [
NTLM
] or [
Kerberos
] in
"Network Authentication".
Select whether or not to require password entry after
authenticating by ID card.
Value : Off, Use Password, Use PIN Code
Model Name Login User Name Login Password
d-COPIA 5001MF 5000 5000
d-COPIA 6001MF 6000 6000