5-14
Operation on the Machine > Application
4
Select [
Yes
].
Installation of the application begins. Depending on the application being installed, the
installation may take some time.
Once the installation ends, the original screen reappears.
Activating Applications
1
Display the screen.
[
System Menu/Counter
] key > [
Application
]
2
Activate the application.
1
Select the desired application > [
Activate
]
You can view detailed information on the selected application by selecting [
Detail
].
2
Enter the license key > [
Official
]
Some applications do not require you to enter a license key. If the license key entry screen
does not appear, go to step 3-3. To use the application as a trial, select [
Trial
] without
entering the license key.
3
Select [
Yes
].
3
Select the application icon in the Home screen.
Select the application icon.
The application will start up.
NOTE
• To install another application, repeat steps 2-3 and 2-4.
• To remove the USB drive, select [
Remove USB Drive
] and wait until the message
"USB Drive can be safely removed." appears. Then remove the USB drive.
NOTE
If the user authentication screen appears, enter your login user name and login password
and select [
Login
]. For this, you need to login as an administrator or as a user with
privileges to carry out this setting. The factory default login user name and login password
are set as shown below.
IMPORTANT
• If you change the date/time while using the trial version of an application, you
will no longer be able to use the application.
• Icons of activated application are displayed in the Home screen.
Model Name
Login User Name
Login Password
d-COPIA 5001MF
5000
5000
d-COPIA 6001MF
6000
6000