Olivetti d-COPIA4513MF plus Operation Manual Download Page 96

Page: 96 / 471

2-41

Installing and Setting up the Machine > Installing Software

Custom Install

The following procedure is an example for installing the software in Windows 8.1 using [

Custom Install

Insert the DVD.

Display the screen.

Select [Custom Install].

Install the software.

Select the device to be installed.

NOTE

• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "

Welcome to the Found New Hardware Wizard

" dialog box displays, select

[

Cancel

• If the autorun screen is displayed, click [

Run setup.exe

• If the user account management window appears, click [

Yes

1 Click [

View License Agreement

]

and read the License Agreement.

2 Click [

Accept

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands