Olivetti d-COPIA4513MF plus Operation Manual Download Page 387

Page: 387 / 471

9-48

User Authentication and Accounting (User Login, Job Accounting) > Unknown User Settings

Unknown User Settings

Unknown ID Job

This specifies the behavior for handling the jobs sent with unknown or unsent login user names or User ID. If the User

Login is set to invalid and Job Accounting is set to valid, follow the procedure when the Account ID is unknown.
The setting items are as follows.

Display the screen.

[

System Menu/Counter

] key > [

User Login/Job Accounting

]

[

Unknown User Settings

] > [

Unknown ID Job

]

Configure the settings.

Select [

Permit

] or [

Reject

Item

Descriptions

Permit

The job is permitted to be printed.

Reject

The job is rejected (not printed).

NOTE

If the login user name entry screen appears during operations, enter a login user name

and password, and select [

Login

]. For this, you need to login with administrator

privileges.
The factory default login user name and login password are set as shown below.

d-COPIA 4513MF plus

d-COPIA 5514MF

d-COPIA 6014MF

d-COPIA 4514MF plus

5500

6000

Login User Name:

4500

Login Password:

4500

5500

6000

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands