Olivetti d-COPIA4513MF plus Operation Manual Download Page 358

Page: 358 / 471

9-19

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Group Authorization Settings

Set restrictions of the machine usage by each individual group registered in the authentication server.

Group Authorization

Use the group authorization.

Display the screen.

[

System Menu/Counter

] key > [

User Login/Job Accounting

]

[

User Login Setting

] > [

Group Authorization Set.

] > [

Group Authorization

]

Select [On].

NOTE

To use the group authorization settings, [

Network Authentication

] must be selected for the authentication method in

"Enabling User Login Administration". Select "On" for "LDAP" in "Protocol Settings".

Enabling User Login Administration (page 9-3)

Protocol Settings (page 8-31)

NOTE

If the login user name entry screen appears during operations, enter a login user name

and password, and select [

Login

]. For this, you need to login with administrator

privileges.
The factory default login user name and login password are set as shown below.

d-COPIA 4513MF plus

d-COPIA 5514MF

d-COPIA 6014MF

d-COPIA 4514MF plus

5500

6000

Login User Name:

4500

Login Password:

4500

5500

6000

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands