Olivetti d-COPIA4513MF plus, Operation Manual

Page: 338 / 471

8-49
Setup and Registration (System Menu) > System Menu
Adjustment/Maintenance
[
System Menu/Counter
] key > [
Adjustment/Maintenance
]
Adjust printing quality and conduct machine maintenance.
Item Description
Quiet Mode Settings
Lower print and scan speed for quiet processing.
Quiet Mode
Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value : Off, On
Specify for Each Job
It is possible to set the use of Quiet Mode for each job, such as copying and sending. Set
whether or not to permit the setting for each job.
Value : Permit, Prohibit
Density Adjustment
Adjust density.
Copy
Adjust copy density.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Send/Box
Adjust scan density when sending or storing the data in Document Box.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Sharpness Adjustment
Adjust the sharpness of the image outline.
Copy
Sharpen or blur overall image outlines during copying. Adjustment can be made in 7 levels.
Value : -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
Send/Box
Sharpen or blur overall image outlines when sending or storing them in the Document Box.
Adjustment can be made in 7 levels.
Value : -3 (Blur), -2, -1, 0, +1, +2, +3 (Sharpen)
Contrast
You can increase or decrease the overall contrast.
Copy
Increases or decreases the overall contrast of copies.
Value : -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Send/Box
Increases or decreases the overall contrast when documents are sent or saved in a document
box.
Value : -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher)
Background Density Adj.
Darkens or lightens overall background density adjustment.
Copy (Auto)
Darkens or lightens overall background density adjustment during copying.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Send/Box (Auto)
Darkens or lightens overall background density when sending images or storing them in the
Document Box.
Value : -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Toner Save Level (EcoPrint)
Select the default Toner Save Level (EcoPrint).
Copy
Select the default Toner Save Level (EcoPrint) at the time of copying.
Value : 1 to 5
Raising the level reduces toner consumption, but image quality falls.
Printer
Select the default Toner Save Level (EcoPrint) at the time of use of the printer.
Value : 1 to 5
Raising the level reduces toner consumption, but image quality falls.
Print Density
Adjust print density. Adjustment can be made in 5 levels.
Value : 1 to 5