Olivetti d-COPIA4513MF plus, Operation Manual

Page: 314 / 471

8-25
Setup and Registration (System Menu) > System Menu
Override A4/Letter
Select whether to treat A4 size and Letter, which are similar in size, as the same size when
printing.
Value
Off: A4 and Letter are not regarded as the same in size.
On: A4 and Letter are regarded as the same in size. The machine will use whichever size
is in the paper source.
Duplex
Select binding orientation for duplex mode.
Value : 1-sided, 2-sided Bind LongEdge, 2-sided Bind ShortEdge
Paper Output
Select either the inner tray or the optional Rear Tray for the output stack.
Value : Inner Tray Face Down, Rear Tray Face Up
NOTE
This function can be used for d-COPIA 5514MF and d-COPIA 6014MF .
Copies
Set the default number of copies, from 1 to 999.
Value : 1 to 999 copies
Orientation
Set the default orientation, [
Portrait
] or [
Landscape
].
Value : Portrait, Landscape
Wide A4
Turn this to on to increase the maximum number of characters that can be printed in a line for
an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This
setting is only effective in PCL6 emulation.
Value : Off, On
Form Feed TimeOut
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed. When the
preset timeout passes, the machine automatically prints paper. The options are between 5 and
495 seconds.
Value : 5 to 495 seconds (in 5 second increments)
LF Action
Set the line feed action when the machine receives the line feed code (character code 0AH).
Value : LF Only, LF and CR, Ignore LF
CR Action
Set the character return action when the machine receives the character return code (character
code 0DH).
Value : CR Only, LF and CR, Ignore CR
Job Name
Set whether the job name set in the Printing System Driver is displayed.
Value : Off, On
NOTE
When selecting [
On
], select the job name to be displayed from [
Job Name
], [
[Job No.] & [Job
Name]
], or [
[Job Name] & [Job No.]
].
User Name
Set whether the user name set in the Printing System Driver is displayed.
Value : Off, On
MP Tray Priority
If paper is set in the MP Tray then it is possible for priority to be given to that MP tray in the
paper feed.
Value
Off: The
Printing System Driver
settings are followed.
Auto Feed: If Auto is selected in the
Printing System Driver
and there is paper in the MP
tray then the paper feed will be from the MP tray.
Always: If there is paper in the MP tray then the paper feed will be from the MP tray
regardless of what is set in the
Printing System Driver
.
Item Description