Olivetti d-COPIA4513MF plus Operation Manual Download Page 238

Page: 238 / 471

5-53

Operation on the Machine > Check the USB Memory Information

Store the document.

Select the folder where the file will be stored.

The machine will display the top 3 folder levels, including the root folder.

Select [

Set the type of original, file format, etc., as desired.

For the features that can be set, refer to the following:

Press the [

Start

] key.

The original is scanned and the data is stored in the USB memory.

Check the USB Memory Information

You can check the USB memory information.
In the removable memory screen, select [

Menu

] > [

Memory Information

Once you confirm the information, select [

Close

Removable Memory (Store File, Printing Documents) (page 6-8)

Removable Memory

10:10

Document Box.

7-9-2.JPG

11-3-3.JPG

1/1

< Back

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands