manualshive.com logo in svg

Olivetti d-COPIA4513MF plus, Operation Manual, Page: 207 / 471

Share
Download
Olivetti d-COPIA4513MF plus Operation Manual Download Page 207

5-22

Operation on the Machine > Sending

Choosing from the One Touch Key

Select the destination using the One Touch Keys.

1

In the basic screen for sending, select [One Touch Key].

2

Select the One Touch Keys where the destination is registered.

If the One Touch Keys for the desired destination is hidden on the touch panel, select [ ] or 

[ ] to scroll and view next or previous One Touch Keys. 

3

Accept the destination > [OK]

Destinations can be changed later.

Entering an E-mail Address

Enter the desired E-mail address.

1

In the basic screen for sending, select [E-mail].

2

Enter destination E-mail address > [OK]

Up to 256 characters can be entered.

To enter multiple destinations, select [

Next Destination

] and enter the next destination. Up to 

100 E-mail addresses can be specified.
You can register the entered E-mail address in the Address Book by selecting [

Menu

] > [

Add 

to Address Book

]. You can also replace the information for a previously registered 

destination.
Destinations can be changed later.

NOTE

This procedure assumes that One Touch Keys have already been registered.

For more information on adding One Touch keys, refer to the following:

Adding a Destination on One Touch Key (One Touch Key) (page 3-33)

NOTE

You can specify a One Touch Key by one touch number by selecting the [

Quick No. 

Search

] key.

Checking and Editing Destinations (page 5-25)

NOTE

To send an E-mail, configure the environment settings necessary.

E-mail Settings (page 2-59)

Character Entry Method (page 11-11)

Checking and Editing Destinations (page 5-25)

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Reviews:

No comments