Olivetti d-COPIA4513MF plus Operation Manual Download Page 185

Page: 185 / 471

4-24

Printing from PC > Status Monitor

Status Monitor Notification Settings

The Status Monitor settings and event list details are displayed.

Select whether notification is performed when an error in the event list occurs.

Select Enable event notification.

If this setting is set to Off, then the Status Monitor will not start up even when printing is

executed.

Select an event to use with the text to speech function in

Available events.

Click Sound file / Text to Speech column.

Click the browse (...) button to notify the event by sound file.

When customizing the message texts to read on the screen aloud, enter the texts in the text

box.

NOTE

The available file format is WAV.

Summary of Contents for d-COPIA4513MF plus
























































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands

Olivetti d-COPIA4513MF plus, Operation Manual

Search results

Summary of Contents for d-COPIA4513MF plus

Reviews:

Related manuals for d-COPIA4513MF plus

Brands by name

Popular brands