4-6
Receiving Faxes > Media Type for Print Output
Media Type for Print Output
Specify the paper type to be used for print output of the received fax.
For more information about configuring settings, refer to the following:
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette.
1
Display the screen.
[
Home
] key > [
...
] > [
System Menu
] > [
Device Settings
] > [
Paper Feeding
] >
[Cassette1-4
*1
Settings]
or
[MP Tray Settings]
Select the cassette that you want to use for fax reception.
*1 The cassette tray displayed varies depending on the installation status of the optional paper
feeder.
2
Selecting the paper size.
1
Inch models:
[Paper Size]
>
[Auto (Inch)]
Metric models:
[Paper Size]
>
[Auto (Metric)]
3
Selecting the paper type.
1
Select
[Media Type]
.
2
Select the paper type.
4
Set the paper type.
Configure paper settings for fax reception. When selecting the paper type, select the same
paper type as you selected in step 3.
For more information about configuring settings, refer to the following:
Supported paper types All Media Types, Plain, Rough, Vellum, Recycled, Preprinted,
Bond, Color, Prepunched, Letterhead, Envelope, Thick, High
Quality, Custom 1-8
Media Type Setting (page 8-10)
NOTE
If FAX exclusive paper source is set, paper is fed from the cassette set as the FAX exclusive
paper source.
FAX Exclusive Paper Source (page 4-7)
IMPORTANT
Specify the settings as follows for the cassette that you want to use for fax reception.
Inch models: [Auto (Inch)]
Metric models: [Auto (Metric)]
