Olivetti d-Copia 3002MF plus, Service Manual, Page: 136 / 752

1-3-69
Contents
Execute the level setting of printable pages between toner near end and toner empty.
Purpose
Change the timing of detecting toner near end earlier than the current setting if the interval between toner
near end and toner empty is too short.
Setting
1.Press the [Start] key.
2.Select the item to set.
*: By using the [+] [-] keys or the numeric keys, change the setting value.
If the set value is increased, the time interval from the toner near end to the toner empty becomes longer.
If the set value is reduced, the time interval from toner near end to toner empty becomes shorter.
0: no toner near end detection
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
U136 Toner level detection setting
(Message: Set Toner Near End Detection)
Items Contents Setting range Initial
setting
Data
varia-
tion
K Setting the black toner level 0 to 9 3 -
Y11 8 240-1
Service Manual