Olivetti d-Copia 3002MF plus, Service Manual, Page: 121 / 752

1-3-54
Contents
Simulate the scanner operation in any condition.
Purpose
Execute the scanner operation to check the abnormal operation and dust adhesion on the slit glass.
Method
1.Press the [Start] key.
2.Select the item to execute.
3.Select [Execute].
4.Press the [Start] key.
*: Scanning starts with the condition specified.
5.To stop the operation, press the [Stop] key.
Setting: Scanner Motor
1.Select the item to set.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Paper size corresponding to each set value
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
U073 Scanner motor operation check
(Message: Check Scanner Motor Operation)
Items Contents
Scanner Motor Execute the scan operation
Home Position Home positioning operation
Dust Check Check if there is dust by turning the exposure lamp on
DP Reading scan position operation for the document processor
Items Contents Setting range Initial
setting
Data
varia-
tion
Zoom Magnification 25 to 400 (%) 100 1%
Size Original size 100 to 10200 10200 100
Lamp Turning the exposure lamp on/off 0: OFF
1: ON 1: ON -
setting Destination setting Destination setting Destination
4300 B5 6100 B5R 8600 B4
5000 A4 6600 8 1/2"×11" 9000 11"×15"
5000 A5R 7100 A4R 10000 A3
5100 11"×8 1/2" 7800 Folio 10200 11"×17"
5100 5 1/2"×8 1/2" 8400 8 1/2"×14"
Y11 8 240-1
Service Manual