Olivetti d-Copia 3002MF plus, Service Manual

Page: 210 / 752

1-3-143
Setting: DP(ChartB)
*: This setting is usually unnecessary.
1.Measure the distance "A" from the leading edge to the black belt (inside) on the adjustment original.
2.Enter the value measured in "Lead" using the the [+] [-] keys keys.
3.Measure the distance "B" from the left edge to the black belt (inside) on the adjustment original.
4.Enter the values measured in "Main Scan" using the the [+] [-] keys keys.
5.Measure the distance "C" from the leading black belt (inside) to the trailing black belt (inside) on the
adjustment original.
6.Enter the values measured in "Sub Scan" using the the [+] [-] keys keys.
7.Press the [Start] key to set the setting value.
Figure 3-23
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items Contents Setting range Initial
setting
Data
variation
Lead Set the adjustment value of the
leading edge. 14.0 to 16.0 15.0 0.1mm
Main Scan Sets the adjustment value of the
left edge. 14.0 to 16.0 15.0 0.1mm
Sub Scan Set the adjustment value of the
trailing edge. 388.0 to 392.0 390.0 0.1mm
Lead
Main Scan
Sub Scan
Original for adjustment Chart 2-2 (P/N:
AVGR11211F
)
Y11 8 240-1
Service Manual