Olivetti d-Copia 283MF, Operation Manual

Page: 45 / 438

Preparation before Use
OPERATION GUIDE 2-9
2
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE:
Be sure to set the time difference before setting the date and time.
1
Turn on the main power switch.
2
Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.
NOTE:
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left Select
key) to select the authentication destination.
3
In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
4
Press the OK key. The Common Settings menu
appears.
Login User Name: L b
********************
Login Password:
[ Menu ] [ Login ]
Sys. Menu/Count.:
a b
5
User Property
*********************
7
Copy
[ Exit ]
6
Common Settings
Common Settings:
a b
*********************
2
Default Screen
3
Sound
[ Exit ]
1
Language