Management
OPERATION GUIDE
11-5
11
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time
you use this machine.
Login
Log in using the procedure below.
NOTE:
Character Entry Method on Appendix-5
for details on entering characters.
1
If the screen below appears during the operations,
perform the following login operations.
2
Press the
OK
key, enter the login user name, and
then press the
OK
key.
3
Press the
V
key to select [Login Password], press
the
OK
key, enter the login password, and then
press the
OK
key.
4
Check the login user name and password are
correct, and press [Login] (the
Right Select
key).
NOTE:
If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the
Left Select
key) to select the authentication destination.
Logout
To log out the machine, press the
Logout
key to return
to the login user name/login password entry screen.
Auto Logout
Logout is automatically executed in the following cases:
• When the
Power
key is pressed to enter the sleep
mode
• When auto sleep is activated
• When auto panel reset is activated
• When auto low power mode is activated
Login User Name
L
b
*******************
Login Password:
[ Menu
] [ Login
]
Summary of Contents for d-Copia 283MF
