Olivetti d-Copia 283MF Operation Manual Download

Page: 342 / 438

Maintenance

9-2

OPERATION GUIDE

Cleaning

Clean the machine regularly to ensure optimum output quality.

CAUTION:

For safety, always unplug the power cord before cleaning the machine.

Glass Platen

Wipe the inside of the document processor and the glass platen with a soft cloth dampened with alcohol or mild
detergent.

IMPORTANT:

Do not use thinner or other organic solvents.

Cleaning the Machine

To avoid print quality problems, the interior of the machine must be cleaned with every toner container
replacement.

Open the front cover.

Summary of Contents for d-Copia 283MF























































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 283MF

Reviews:

Related manuals for d-Copia 283MF

Brands by name

Popular brands

Olivetti d-Copia 283MF, Operation Manual

Search results

Summary of Contents for d-Copia 283MF

Reviews:

Related manuals for d-Copia 283MF

Brands by name

Popular brands