Olivetti d-Copia 283MF, Operation Manual

Page: 230 / 438

Default Setting (System Menu)
8-42 OPERATION GUIDE
Collate
Set the defaults for Collate. The table below shows the available settings.
NOTE:
Refer to page 3-17 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2
Press the OK key. The Common Settings menu
appears.
3
Press the U or V key to select [Function Default].
4
Press the OK key. The Function Default menu
appears.
5
Press the
U
or
V
key to select [Collate].
6
Press the OK key. Collate appears.
7
Press the U or V key to select [Off] or [On].
Item Description
Collate Off Collate not performed.
On Collate performed.
Sys. Menu/Count.:
a b
4
User/Job Account
5
User Property
*********************
[ Exit ]
6 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1
Language
Function Default:
a b
*********************
2
Scan Resolution
3
FAX Resolution
[ Exit ]
1 Color Selection
Collate: a b
1 Off
********************* 2 *On