Olivetti d-COPIA 255MF Operation Manual Download Page 351

Page: 351 / 513

8-32

System Menu > [System/Network]

[System/Network]

Configures machine system settings.

[Network]

Configures network settings.

[Host Name]

Menu Transition: [System Menu / Counter] key > [System/Network] > [Network] > [Host Name]

[Wi-Fi Direct Settings]

Menu Transition: [System Menu / Counter] key > [System/Network] > [Network] > [Wi-Fi Direct Settings]

Configure Wi-Fi Direct settings.

Item

Description

Host Name

Check the host name of the machine. Host name can be changed from .

Changing Device Information (2-44)

NOTE

This function is displayed when the Wireless Network Interface Kit (IB-36) is installed.

The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service
representatives for detail.

IB-36 <Wireless Network Interface Kit> (12-3)

Item

Description

Wi-Fi Direct

Select whether to use Wi-Fi Direct.

Value:

Off, On

Device Name

Configure the device name setting.

NOTE

Up to 32 characters can be entered.

This function is displayed when [On] is selected for the Wi-Fi Direct setting.

IP Address

Use this to check the machine IP address.

[TCP/IP Setting] (8-37)

Value

: ###.###.###.###

NOTE

If [On] is selected, set the time until the job is skipped.

This function is displayed when [On] is selected for the Wi-Fi Direct setting.

Auto Disconnect

Automatically disconnects devices connected by Wi-Fi Direct.

Value:

Off, On

NOTE

When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.

Summary of Contents for d-COPIA 255MF

































































































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA 255MF

Reviews:

Related manuals for d-COPIA 255MF

Brands by name

Popular brands

Olivetti d-COPIA 255MF, Operation Manual

Search results

Summary of Contents for d-COPIA 255MF

Reviews:

Related manuals for d-COPIA 255MF

Brands by name

Popular brands