manualshive.com logo in svg

Olivetti d-COPIA 255MF, Operation Manual, Page: 223 / 513

Share
Download
Olivetti d-COPIA 255MF Operation Manual Download Page 223

5-19

Operation on the Machine > Frequently-Used Sending Method

2

[Menu] >  [Connection Test]

The message "Connected" appears when connection with the destination is correctly established. screen appears. If 
"Cannot connect" appears, check the information you entered.

To enter multiple destinations, select [Next Destination] and enter the next destination.

You can register the entered information in the Address Book by selecting [Add Address Book].

7

Select [OK].

Destinations can be changed later.

 Checking and Editing Destinations (5-30)

8

Selecting the functions.

Selecting [Functions] displays a list of other functions.

[Send] (xii)

9

Press the [Start] key.

Start sending.

Scanning with a TWAIN/WIA Compatible Application

This section explains how to scan an original using TWAIN or WIA.

1

Display the screen.

1

Start up the TWAIN or WIA compatible application.

2

Select the machine using the application and display the dialog box.

2

Configure the settings.

Select scanning settings in the dialog box that opens.

NOTE

Before sending a document, confirm that TWAIN/WIA driver is installed on a computer and the settings are 
configured.

Setting TWAIN Driver (2-37)

Setting WIA Driver (2-39)

NOTE

For selecting the machine, see the Operation Guide or Help for each application software.

NOTE

For the settings, refer to Help in the dialog box.

Summary of Contents for d-COPIA 255MF


































































































































































































































































































































































































































































































































Reviews:

No comments