manualshive.com logo in svg

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 62 / 492

Share
Download
Olivetti d-Copia 1801MF Plus Service Manual Download Page 62

2NC/2NF/2NG/2NN/3P7/3P8/3P9

1-3-8

(3) Contents of the maintenance mode items

U000

Mainte Report

Description

Outputs lists of the current settings of the maintenance items and paper jam and service call 
occurrences. Outputs the event log. Also sends output data to the SD card.

Purpose

To check the current setting of the maintenance items, or paper jam or service call occurrences.
Before initializing or replacing the backup RAM, output a list of the current settings of the mainte-
nance items to reenter the settings after initialization or replacement.

Method

1. Press the start key.
2. Select the item to be output using the cursor up/down keys.

Display

Output list

Maintenance

Output the maintenance report.

User Status

Output the user status report.

Service Status

Output the service status report.

Event

Output the event report.

All

Output the All report.

3. Press the start key. A list is output.

* : When A4/Letter paper is available, a report of this size is output. If not, specify the paper 

feed location.

Method: Send to the SD card

1. Press the power key on the operation panel, and after verifying the main power indicator has 

gone off, switch off the main power switch.

2. Insert SDcard in SD card slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the item to be send.
7. Select [Text] or [HTML].

8. Press the start key.

Output will be sent to the SD card.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Display

Output list

Print

A report is printed.

Text

It outputs to SD card in Text form. 

HTML

It outputs to SD card in HTML form. 

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Reviews:

No comments