manualshive.com logo in svg

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 171 / 492

Share
Download
Olivetti d-Copia 1801MF Plus Service Manual Download Page 171

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2

1-3-117

U942

Adj DP Loop Amt

Description

Adjusts the deflection generated when the document processor is used.

Purpose

Use this mode if an original non-feed jam, oblique feed or wrinkling of original occurs when the 
document processor is used.

Setting

1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
6. Change the setting value using change keys * or numeric keys.

* :  Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)

Display

Description

Setting 

range

Initial 

setting

Change in 

value per step

Front

Deflection of single-sided original

-30 to 30

0

1

Back

Deflection of double-sided original

-60 to 60

0

1

* : The greater the value, the larger the deflection; the smaller the value, the smaller the 

deflection.
If an original non-feed jam or oblique feed occurs, increase the setting value. If wrinkling of 
original occurs, decrease the value.

7. Press the start key. The value is set.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U969

Toner Area Code

Description

Displays the toner area code.

Purpose

To check the toner area code.

Method

1. Press the start key. The toner area code is displayed.

Display

Description

Code

Toner area code.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Reviews:

No comments