Olivetti d-Copia 1801MF Plus Service Manual Download Page 169

Page: 169 / 492

2NC/2NF/2NG/2NN/3P7/3P8/3P9

1-3-115

U910

Clr Coverage Dat

Description

Clears the accumulated data for the print coverage per A4 size paper and its period of time (as
shown on the service status report).

Purpose

To clear data as required at times such as during maintenance service.

Method

1. Press the start key.
2. Select [Execute].

Display

Description

Execute

The print coverage data is cleared.

3. Press the start key. The print coverage data is cleared.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U927

Clr Chg/Life Cnt

Description

Resets all of the counts back to zero.

Purpose

The total account counter and the machine life counter can be cleared only once if all count values
are 1000 or less.

Method

1. Press the start key.
2. Select [Execute].

Display

Description

Execute

All copy counts and machine life counts are cleared.

3. Press the start key. All copy counts and machine life counts are cleared.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews:

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 169 / 492

Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews: