manualshive.com logo in svg

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 135 / 492

Share
Download
Olivetti d-Copia 1801MF Plus Service Manual Download Page 135

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2

1-3-81

U600

Init All Data

Description

Initializes software switches and all data in the backup data on the FAX control board, according to 
the destination and OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes 
the file system, communication past record and register setting contents.

Purpose

To initialize the FAX control board.

Method

1. Press the start key.
2. Select [Execute]. The screen for entering the destination code and OEM code is displayed.
3. Select [Country Code] and enter a destination code using the numeric keys (refer to the desti-

nation code list on following for the destination code).

Display

Destination

Country Code

Country code.

OEM Code

OEM code.

Execute

Data initialization starts.

4. Press the start key.

There is no operation necessary on this screen.
The destination code and the OEM code are displayed with the values currently set.

5. Press the start key. Data initialization starts. To cancel data initialization, press the stop key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed. A 

ROM version displays three kinds, application, boot, and IPL.

* : When initialization is successful, "Completed" during 1 second is displayed.
* : Where an irregular value is inputted, when it initializes, the following error displays are per-

formed.

Kind of error

Unknown Country

Unknown OEM

Destination code list

Code

Destination

Code

Destination

000

Japan

152

Saudi Arabia

007

Argentina

156

Singapore

009

Australia

159

South Africa

038

China

169

Thailand

080

Hong Kong

181

U.S.A.

088

Israel

250

Russia

097

Korea

253

CTR21 (European nations)

115

Mexico

  Italy

126

New Zealand

  Germany

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Reviews:

No comments