Olivetti d-Copia 1801MF Plus Service Manual Download Page 81

Page: 81 / 492

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2

1-3-27

U035

Adj Folio Sz

Description

Changes the printing area for copying on folio paper.

Purpose

To prevent cropped images on the trailing edge or left/right side of copy paper by setting the actual
printing area for folio paper.

Setting

1. Press the start key.
2. Select the item to be set.
3. Change the setting value using change keys * or numeric keys.

* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)

Display

Description

Setting range

Initial setting

Length

Height of a FOLIO paper.

330 to 356(mm)

330

Width

Width of a FOLIO paper.

200 to 220(mm)

210

4. Press the start key. The value is set.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

U037

Chk Fan Motor

Description

Drives each fan motor.

Purpose

To check the operation of each fan motor.

Method

1. Press the start key.
2. Select the fan motor to be operated.
3. Press the start key. The operation starts.

Display

Description

Main board

Main board fan motor is turned on.

* : A fan motor cannot be operated while an engine drives.

4. To stop operation, press the stop key.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews:

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 81 / 492

Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews: