Olivetti d-Copia 1801MF Plus Service Manual Download Page 205

Page: 205 / 492

2NC/2NF/2NG/2NN/3P7/3P8/3P9

1-4-33

7800

Broken temperature sensor
wire

Input from temperature sensor
is 0.3 V (A/D value) or less

Outer temperature
sensor

1. Confirm that the wiring connector is

firmly connected and, if necessary,
connect the connector all the way in.
Temperature sensor and main/engine
PWB (YC6)

2. If the wiring is disconnected, shorted or

grounded, replace the wiring.

3. Replace the temperature sensor.

Main/Engine PWB

1. Check the main/engine software and

upgrade to the latest, if necessary.

2. Replace the main/engine PWB (see

page 2-2-11).

7810

Short-circuited tempera-
ture sensor wire

Input from temperature sensor
is 0.3 V (A/D value) or more

Outer temperature
sensor

1. Confirm that the wiring connector is

firmly connected and, if necessary,
connect the connector all the way in.
Temperature sensor and main/engine
PWB (YC6)

2. If the wiring is disconnected, shorted or

grounded, replace the wiring.

3. Replace the temperature sensor.

Main/Engine PWB

1. Check the main/engine software and

upgrade to the latest, if necessary.

2. Replace the main/engine PWB (see

page 2-2-11).

7900

Drum EEPROM error

No response is issued from
the device in reading/writing
for 5 ms or more and this
problem is repeated five times
successively.

DR PWB

1. Confirm that the wiring connector is

firmly connected and, if necessary,
connect the connector all the way in.
DR PWB and main/engine PWB (YC9)

2. If the wiring is disconnected, shorted or

grounded, replace the wiring.

3. Replace the Drum unit (see page 1-5-

40).

Main/Engine PWB

1. Check the main/engine software and

upgrade to the latest, if necessary.

2. Replace the main/engine PWB (see

page 2-2-11).

Code

Contents

Related parts

Check procedures/

corrective measures

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews:

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 205 / 492

Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews: