manualshive.com logo in svg

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 136 / 492

Share
Download
Olivetti d-Copia 1801MF Plus Service Manual Download Page 136

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2

1-3-82

Code

Destination

Code

Destination

253

  Spain

253

  Belgium

  U.K.

  Denmark

  Netherlands

  Finland

  Sweden

  Portugal

  France

  Ireland

  Austria

  Norway

  Switzerland

254

Taiwan

U601

Init Keep Data

Description

Initializes software switches on the FAX control board according to the destination and OEM.

Purpose

To initialize the FAX control board without changing user registration data.

1. Press the start key.
2. Select [Execute]. The screen for entering the destination code and OEM code is displayed.
3. Select [Country Code] and enter a destination code using the numeric keys (refer to the desti-

nation code list on page 1-3-81 for the destination code).

Display

Destination

Country Code

Country code.

OEM Code

OEM code.

Execute

Data initialization starts.

4. Press the start key.

There is no operation necessary on this screen.
The destination code and the OEM code are displayed with the values currently set.

5. Press the start key. Data initialization starts. To cancel data initialization, press the back key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed. A 

ROM version displays three kinds, application, boot, and IPL.

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Reviews:

No comments