Olivetti d-Copia 1801MF Plus Service Manual Download Page 117

Page: 117 / 492

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2

1-3-63

U251

Clr Mnt Cnt

Description

Displays and clears or changes the maintenance count.

Purpose

To verify the maintenance counter count.
Also to clear the count during maintenance service.

Setting

1. Press the start key.
2. Select the item to be changed.
3. Change the setting using change keys * or numeric keys.

* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)

Display

Description

Setting range

M.Cnt A

Count value for maintenance cycle A.

0 to 9999999

Clear

A value is cleared.

Clearing

1. Select [Clear].
2. Press the start key. The setting value is cleared.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews:

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 117 / 492

Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews: