Olivetti d-Copia 1801MF Plus Service Manual Download Page 111

Page: 111 / 492

2NC/2NF/2NG/2NN/3P7/3P8/3P9-2

1-3-57

U199

Fuser Temp

Description

Displays the detected fuser temperature.

Purpose

To check the fuser temperature.

Method

1. Press the start key. The fuser temperature is displayed.

Display

Description

Fix Center

Temperature in the center of the fixing. (°C)

Fix Edge

Temperature in the edge of the fixing. (°C)

* : Temperature a acquired and re-displayed periodically.

Completion

Press the stop key. The screen for selecting a maintenance mode No. is displayed.

U203

Chk DP Ope

Description

Simulates the original conveying operation separately in the DP.

Purpose

To check the DP operation.

Method

1. Press the start key.
2. Place an original in the DP.
3. Select the mode to be operated.

Display

Description

Mono

Mono reading

Color

Color reading

4. Select the item to be operated.

Display

Description

ADP

With paper, single-sided original.

RADP

With paper, double-sided original.

5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Summary of Contents for d-Copia 1801MF Plus













































































































































































































































































































































































































































































































Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews:

Olivetti d-Copia 1801MF Plus, Service Manual, Page: 111 / 492

Search results

Summary of Contents for d-Copia 1801MF Plus

Reviews: