Olivetti d-COLOR P2026, Service Manual, Page: 92 / 207

Problem
(11)
MP solenoid does
not operate.
Causes
1. Defective connector
cable or poor con-
tact in the connector.
2. Defective solenoid.
3. Defective PWB.
(12)
The message
requesting paper to
be loaded is shown
when paper is
present on the cas-
sette.
1. Defective connector
cable or poor con-
tact in the connector.
2. Deformed actuator of
the paper sensor.
3. Defective paper sen-
sor.
4. Defective PWB.
(13)
The message
requesting paper to
be loaded is shown
when paper is
present on the MP
tray.
1. Defective connector
cable or poor con-
tact in the connector.
Check procedures/corrective measures
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
MP solenoid and engine PWB (YC4)
Replace the MP solenoid.
Replace the engine PWB and check for correct operation
(see page 1-5-26).
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Cassette PWB (YC1) and engine PWB (YC21)
Check visually and replace if necessary.
Replace the cassette PWB.
Replace the engine PWB and check for correct operation
(see page 1-5-26).
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
MP paper sensor and engine PWB (YC16)
2. Deformed actuator of Check visually and replace if necessary.
the MP paper sensor.
3. Defective MP paper
sensor.
4. Defective PWB.
Replace the MP paper sensor.
Replace the engine PWB and check for correct operation
(see page 1-5-26).
Reinsert the connector. Also check for continuity within the
connector cable. If none, replace the cable.
Cassette size switch and engine PWB (YC17)
Replace the cassette size switch.
Replace the engine PWB and check for correct operation
(see page 1-5-26).
(14)
The size of paper
on the cassette is
not displayed cor-
rectly.
1. Defective connector
cable or poor con-
tact in the connector.
2. Defective cassette
size switch.
3. Defective PWB.
(15)
A paper jam in the
paper feed, paper
conveying or eject
section is indi-
cated when the
main power switch
is turned on.
1. A piece of paper torn Check visually and remove it, if any.
from paper is caught
around registration
sensor, MP feed sen-
sor or eject sensor.
2. Defective registration Replace the registration sensor.
sensor.
3. Defective MP feed
sensor.
4. Defective eject sen-
sor.
Replace the MP feed sensor.
Replace the eject PWB.
1-4-38