Olivetti d-COLOR P2026, Service Manual, Page: 61 / 207

(2) Self diagnostic codes
If the part causing the problem was not supplied, use the unit including the part for replacement.
Code
0100
Contents
Backup memory device
error
Causes
Defective flash
memory.
Defective main
PWB.
0120 MAC address data error
For data in which the MAC
address is invalid.
Backup memory read/write
error (main PWB)
Defective flash
memory.
Defective engine
PWB.
Defective flash
memory.
Defective main
PWB.
0140 Backup memory data error
(main PWB)
Defective flash
memory.
Defective main
PWB.
0150 Engine PWB EEPROM error
Detecting engine PWB
EEPROM communication
error.
Improper installa-
tion engine PWB
EEPROM.
Defective engine
PWB.
Device damage of
EEPROM.
0170 Billing counting error
A checksum error is detected
in the main and engine
backup memories for the bill-
ing counters.
Expanded memory (DIMM)
installing error
The expansion memory mod-
ules (DIMM) are not correctly
mounted.
Expanded memory (DIMM)
error
The expansion memory mod-
ules (DIMM) mounted on the
main PWB does not operate
correctly.
Data damage of
EEPROM.
Defective PWB.
Check procedures/
corrective measures
Replace the main PWB and check for cor-
rect operation (see page 1-5-29).
Replace the main PWB and check for cor-
rect operation (see page 1-5-29).
Replace the main PWB and check for cor-
rect operation (see page 1-5-29).
Replace the engine PWB and check for cor-
rect operation (see page 1-5-26).
Replace the main PWB and check for cor-
rect operation (see page 1-5-29).
Replace the main PWB and check for cor-
rect operation (see page 1-5-29).
Replace the main PWB and check for cor-
rect operation (see page 1-5-29).
Replace the main PWB and check for cor-
rect operation (see page 1-5-29).
Check the installation of the EEPROM and
remedy if necessary.
Replace the engine PWB and check for cor-
rect operation (see page 1-5-26).
Contact the Service Administrative Division.
Contact the Service Administrative Division.
Replace the main PWB or the engine PWB
and check for correct operation (see page 1-
5-29, 1-5-26).
Check the installation of the expanded mem-
ory (DIMM).
0130
0600 Improper installa-
tion expanded
memory (DIMM).
0610 Defective
expanded memory
(DIMM).
Defective main
PWB.
Replace the expanded memory (DIMM) and
check for correct operation (see page 1-2-
10).
Replace the main PWB and check for cor-
rect operation (see page 1-5-29).
1-4-7