4.2.11 Feeder unit
(1)
Open the top cover.
(2)
Open the front cover. (See Subsection 4.2.4)
(3)
Remove the Lever_Lock_Assembly
1
.
(4)
Remove the left side cover. (See Subsection 4.2.1)
(5)
Remove the right side cover. (See subsection 4.2.2)
(6)
Detach the plate shield front. (See Subsection 4.2.16)
(7)
Remove a connector
3
connecting to the feeder unit
2
from the TB3 board (main board).
(8)
Remove four screws (silver)
4
to remove the feeder unit
2
.
(9)
Remove claws to remove the cover sensor
5
.
(10) Remove the MIP board (front sensor board)
6
.
Figure 4-2-11 Feeder unit
1
2
3
3
4
5
6
×
4
HOP
TB3-PCB
(Main circuit board PCB)
TB3-PCB (Main circuit board PCB)
Y110260-4
d-Color P116 Service Manual
65