Olivetti d-COLOR MF752, Quick Assist Manual, Page: 78 / 296

Q1. Can frequently used fax numbers be registered? 4
4-4 d-Color MF752/652
4.1
[Line Settings] Configure the line that is used to send faxes.
•
[Overseas TX]: Faxes are sent to locations with poor communication
conditions at a lower baud rate.
• [ECM OFF]: Error Correction Mode (ECM) is canceled to shorten the
transmission time. ECM is an error correction mode defined by ITU-T
(International Telecommunication Union - Telecommunication Stand-
ardization Sector).
Fax machines equipped with the ECM feature communicate with each
other, confirming that the data sent is free of errors. This prevents im-
age blurring caused by noise on the telephone line.
• [V34 OFF]: V34 is a communication mode used for super G3 fax com-
munication. When the remote machine or this machine is connected to
a telephone line via PBX, however, you may not establish a communi-
cation in the super G3 mode depending on telephone line conditions.
In this case, it is recommended that you turn the V34 mode off to send
data. After sending has been completed, this machine automatically re-
turns to the V34 mode.
• [Check Dest. & Send]: The specified fax number is compared with the
remote fax number (CSI) and data is sent only when those fax numbers
match. If they do not match, the communication will fail; therefore pre-
venting a sending error.
For transmission to take place in this mode, the fax number of the orig-
inating machine must be registered on the recipient side.
• [Select Line]: If the
Fax Kit
is installed, you can select [Line 1] or [Line
2] to send a fax.
Settings Description