Olivetti d-color MF651, Service Manual, Page: 475 / 1053

Field Service Ver. 2.0 Jul. 2009 10. UTILITY
415
ADJUSTMENT
/ SETTING
C. Number of RX Call Rings
(1) Use
• To set the number of times to receive call rings.
• To change the number of times of the fake ringback tone after it starts calling until it
starts receiving.
(2) Procedure
• The default setting is 2 X.
“2 X” (0 to 15)
D. Number of Redials
(1) Use
• To set the number of redials.
• To change the number of times to redial when the line is busy, etc.
• The line which can be set up is different depending on the country.
(2) Procedure
• The default setting is 3 X.
“3 X” (0 to 7)
NOTE
• The line which can be set up is different depending on the country.
E. Redial Interval
(1) Use
• To set the interval for redialing.
(2) Procedure
• The default setting is 3 min.
“3 min” (1 to 15)
F. Line Monitor Sound
(1) Use
• To set whether to output the line monitor sound from the speaker or not.
(2) Procedure
• The default setting is ON.
“ON” OFF
G. Line Monitor Sound Vol.
(1) Use
• To set the volume of the speaker.
(2) Procedure
• Change the volume by touching the [Lower] or [Higher].
Y110571-1 Service Manual