Olivetti d-color MF651, Service Manual, Page: 464 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
404
ADJUSTMENT
/ SETTING
(4) Scanner Settings: Scanner Information
<Use>
• To set the WS scanner information.
<Procedure>
1. Touch [Scanner Information].
2. Enter the friendly name (up to 63 characters) on the on-screen keyboard, and touch
[OK].
(5) Scanner Settings: Connection Timeout
<Use>
• To set the timeout period for connection of WS scanner.
<Procedure>
1. Press the Clear key.
2. Enter the connecting timeout period between 30 and 300 using the 10-key pad.
10.6.50 Network Setting-SSDP Settings
A. Use
• To set whether to use SSDP protocol.
• To set the multicast TTL value.
B. Procedure
• The default setting is ON.
“ON” OFF
<Multicast TTL Setting >
• The default setting is 1.
“1” to 10
10.6.51 Network Setting-Detail Settings
A. Device Setting
(1) MAC Address
<Use>
• To display the MAC address of the machine.
<Procedure>
• The address cannot be changed.
(2) Network Speed
<Use>
• To set the network speed.
<Procedure>
• The default setting is Auto.
“Auto” 10Mbps Full Duplex 10Mbps Half Duplex
100Mbps Full Duplex 100Mbps Half Duplex 1Gbps Full Duplex
NOTE
• When Network speed setting is changed, turn off the main power switch and turn it
on again more than 10 seconds after.
Service Manual Y110571-1