Olivetti d-color MF651, Service Manual, Page: 412 / 1053

10. UTILITY Field Service Ver. 2.0 Jul. 2009
352
ADJUSTMENT
/ SETTING
10.6.15 System Settings-Skip Job Operation Settings
A. Use
• Configure whether to start processing for the next job when the current job stops due to
running out of paper in the paper tray.
B. Procedure
1. Touch [Skip Job Operation Settings].
2. Make settings and touch [OK].
10.6.16 System Settings-Default Bypass Paper Type Setting
A. Use
• Configure the initial settings for the paper type to be used for the bypass tray.
B. Procedure
1. Touch [Default Bypass Paper Type Setting].
2. Select the desired paper type and touch [OK].
10.6.17 System Settings-Page Number Print Position
A. Use
• Specify a page number print position when printing page numbers after configuring 2-
sided print or booklet settings. Select whether to print the page numbers on a same posi-
tion on all pages or on positions symmetric with respect to the stapling position.
B. Procedure
1. Touch [Page Number Print Position].
2. Check test print and fine adjust the position.
10.6.18 System Settings-Advanced Preview Setting
• It will be displayed in
d-Color MF
65
1
/
MF
55
1
machines where the function version is
version
2 or later and in all
d-Color MF
45
1
machines.
A. Original direction setting display
(1) Use
• To set whether to display the screen where the original set direction can be selected after
touching [Preview] when printing with the advanced preview function.
(2) Procedure
• The default setting is ON.
“ON” OFF
10.6.19 Administrator/Machine Settings-Administrator Registration
A. Use
• Registers administrator information displayed Help service/Administrator information
screen as well as sender addresses used for E-mail transmission from the machine.
B. Procedure
1. Touch [Administrator Name], [E-mail Address] to input them.
2. Using the 10-key pad, enter the extension No.
Service Manual Y110571-1