Olivetti d-color MF651, Service Manual, Page: 365 / 1053

Field Service Ver. 2.0 Jul. 2009 10. UTILITY
305
ADJUSTMENT
/ SETTING
D. Enter Power Save Mode
(1) Use
• To set whether to immediately switch to the power save mode after printing in case of
receiving the fax/PC print during power save mode.
Normal : Switches to the power save mode according to the normal power save
mode after the printing.
Immediately : Switches to the power save mode immediately after the printing.
(2) Procedure
• The default setting is Normal.
“Normal” Immediately
10.6.2 System Settings-Output Settings
A. Print/Fax Output Settings
(1) Use
• To set the timing for printing for the PC print job or fax received.
Batch Print : Starts printing when all data are received
Page Print : Starts printing every time data for each page are received
(2) Procedure
<Printer>
• The default setting is Page Print.
<Fax>
• The default setting is Batch Print.
NOTE
• [FAX] will be displayed only when the optional fax kit (FK-502) is mounted.
B. Output Tray Settings
• It will be displayed when the optional finisher FS-526/527 or the job separator JS-504 is
mounted.
(1) Use
• To set the priority output tray for each application (Copy print, Printer, Fax and Print
Reports).
(2) Procedure
• The default settings are as follows.
Copy : Tray 1
Print : Tray 1
Report Output : Tray 2
Fax
: Tray 2
• [Tray 3] will be displayed only when the job separator JS-603 is mounted to the finisher
FS-527.
Y110571-1 Service Manual