Olivetti d-color MF651, Service Manual, Page: 746 / 1053

17. JAM DISPLAY Field Service Ver. 2.0 Jul. 2009
686
TROUBLESHOOTING
17.3.15 ADF paper feed section
17.3.16 ADF transport section
Relevant parts
Take-up motor (M2)
After separate sensor (PS4)
Length sensor/1 (PS10)
Length sensor/2 (PS11)
Length sensor/3 (PS12) DF control board (DFCB)
Step Action
WIRING DIAGRAM
Control signal
Location (Electri-
cal component)
1 Initial check items — —
2 PS4 I/O check, sensor check DFCB PJ11-5 (ON) DF-618 B-5
3 PS10 I/O check, sensor check REYB PJ5-12 (ON) DF-618 K to L-8
4 PS11 I/O check, sensor check REYB PJ5-8 (ON) DF-618 K to L-9
5 PS12 I/O check, sensor check REYB PJ5-6 (ON) DF-618 K to L-9
6 M2 operation check DFCB PJ8-5 to 10 DF-618 I-6
7 Change DFCB — —
Relevant parts
Registration motor (M7)
Take-up motor (M2)
Registration sensor (PS3)
After separate sensor (PS4)
Before read sensor (PS9) DF control board (DFCB)
Step Action
WIRING DIAGRAM
Control signal
Location (Electri-
cal component)
1 Initial check items — —
2
Adjust the height of the guide support for
the original glass moving unit.
See P.646
— —
3 PS3 I/O check, sensor check DFCB PJ10-11 (ON) DF-618 B-3
4 PS4 I/O check, sensor check DFCB PJ11-5 (ON) DF-618 B-5
5 PS9 I/O check, sensor check DFCB PJ14-8 (ON) DF-618 B-6
6 M7 operation check DFCB PJ9-5 to 8 DF-618 I-5
7 M2 operation check DFCB PJ8-5 to 10 DF-618 I-6
8 Change DFCB — —
Service Manual Y110571-1