Olivetti d-color MF651, Service Manual, Page: 726 / 1053

17. JAM DISPLAY Field Service Ver. 2.0 Jul. 2009
666
TROUBLESHOOTING
72-21 FS exit section <When FS-526 is installed>
• The 2 staples stacker empty sensor
(PS15) is not turn OFF even after the set
period of time has elapsed after the start
of exiting paper.
<When FS-527 is installed>
• The tray1 paper detection sensor (PS16)
is not turned ON even after the set period
of time has elapsed after the lower path
sensor (PS9) is turned ON by the paper.
Front door P.692
72-22 <When FS-526 is installed>
• The sub tray exit sensor (PS8) is not
turned ON even after the set period of
time has elapsed after the Z-fold punch
regist sensor (PS2) is turned ON by the
paper.
<When FS-527 is installed>
• The tray2 path sensor (PS6) is not turned
ON even after the set period of time has
elapsed after the registration sensor
(PS10) is turned ON by the paper.
• The tray2 path sensor (PS6) is not turn
OFF even after the set period of time has
elapsed after it turns ON.
Front door P.693
72-23 • The sub tray exit sensor (PS8) is not turn
OFF even after the set period of time has
elapsed after it turns ON.
Front door P.694
72-25 SD exit section • SD exit sensor/LED (PS28) is not turned
ON by the paper even after the set period
of time has elapsed after the half-fold exit
operation started.
Front door, stacker
unit P.694
72-26 <When FS-526+SD-508 is installed>
• The SD exit sensor/LED (PS28) is not turn
OFF even after the set period of time has
elapsed after it turns ON.
<When FS-527+SD-509 is installed>
• The paper detection sensor/2 (PS44) is
not turn OFF even after the set period of
time has elapsed after it turns ON.
72-31 JS exit section • The job tray paper exit sensor (PS402) is
not turned ON even after the set period of
time has elapsed after the z-fold Punch
regist sensor (PS2) is turned ON by the
paper.
Separator cover P.695
72-34 • The job tray paper exit sensor (PS402) is
not turn OFF even after the set period of
time has elapsed after it turns ON.
72-35 PI section • The paper entrance sensor /Lw (PS206) is
not turned ON even after the set period of
time has elapsed after the transfer clutch /
Lw (CL202) is turned ON by the paper.
Upper door P.695
JAM
code
JAM type Detection timing
Misfeed processing
location
Ref.
page
Service Manual Y110571-1